Surface properties of ω-perfluorooctyl-alkyl polyacrylates: odd–even effect

A series of ω-perfluorooctyl-alkyl polyacrylates has been prepared and analysed. The odd–even effect, already observed in the case of liquid crystalline polymers has been exhibited for perfluorinated ones. Values of the contact angles to advanced (θ_a), with withdrawal (θ_r), as well as the contact angle hysteresis (Δθ) of various ω-perfluorooctyl-alkyl polyacrylates in water at 20 °C are described. Contrary to the advancing contact angle which is almost independent of spacer length, the receding one varies strongly with it.     

The effect of interface deformation due to gravity on line tension measurement by the capillary rise in a conical tube

Much research has been done on line tension measurement and interpretation, and attempts have also been made to measure line tension with simple, cheap and reliable methods that do not require excessive sophistication. Of particular interest is the method of determining line tensions of solid–liquid–vapor systems from the capillary rise in a conical tube. This simple and relatively inexpensive method gives line tension values comparable to those reported in the literature obtained via highly sophisticated instruments or techniques such as the well known axisymmetric drop shape analysis technique. The absolute value of line tension obtained using the conical tube method and assuming a spherical liquid–vapor interface is larger but of the same order of magnitude (1 μJ m⁻¹) as that reported in the literature. A theoretical analysis presented herein shows that by including the deformation of the liquid–vapor interface due to gravity in the conical capillary analysis, the line tension value inferred from the experimental data is reduced by approximately 50% and compares better with values in the literature obtained using other sophisticated methods. Thus a relatively simple, cheap, accurate and reliable method of line tension measurement has been advanced.     

Microfabricated ISEs: critical comparison of inherently conducting polymer and hydrogel based inner contacts

A rigorous side by side comparison of miniature planar potassium-selective electrodes with hydrogel and potassium hexacyanoferrate(II)/(III) doped polypyrrole (PPy/FeCN) based inner contacts is presented. The planar electrodes were manufactured by screen printing as four- and five-site arrays on ceramic substrates. These electrode arrays were incorporated into a flow-through cell, which could accommodate nine electrode sites. Two identical flow cells were connected in series and the effect of the inner contacts on the analytical performance of the respective electrodes has been critically evaluated. The time necessary to reach steady state conditions has been determined and the effect of experimental parameters (temperature, ambient light intensity, CO₂, and O₂ concentration of the sample) on the potential stability of the electrodes was analyzed. At controlled temperature, the drift of the planar potassium electrodes with hydrogel and PPy/FeCN solid contact were 0.11±0.02 mV h⁻¹ and 0.03±0.007 mV h⁻¹, respectively. The experimental data proved that there is no aqueous film formation between the PPy/FeCN film and the potassium-selective solvent polymeric membrane.     

Measuring Contact Angles at Copper Electrodes

Potential dependences of the angle of contact between perfluorodecaline C₁₀F₁₈ and copper, copper(I) sulfide, and copper telluride Cu₄Te₃ in 0.1 M CH₃COONa are measured. The data are in good agreement with the metal hardness measured in 1 M KOH. The uncharged-surface potentials (USP) for copper, copper(I) sulfide, and copper telluride equal 0.05–0.07, –0.02 to –0.04, and 0.05–0.07 V (NHE) in 0.1 M CH₃COONa. Studying the effect of Br^– ions shows that USP for copper and Cu₂S shift in, respectively, the negative and positive directions with an increase in [Br^–]. For copper telluride, USP shifts in the positive direction at low Br^– concentrations, and at NaBr concentrations in excess of 0.04 M, in the negative direction.     

Effect of surface treatment on the Hamaker constant of intermediate modulus carbon fibers

The Hamaker constant of unsized intermediate modulus carbon fibers was evaluated by contact angle measurement following the Fowkes theory of interfacial energetics. The effects of a surface treatment (performed by the manufacturer) and an oxygen plasma treatment (performed by us), both of oxidizing nature, proved to slightly increase the value of the Hamaker constant to a level that enhanced by about 9% the Lifshitz-van der Waals contribution to the theoretical adhesion force between the fiber and an epoxy matrix. A possible explanation of the observed increase of the Hamaker constant is the higher contribution to the overall Lifshitz-van der Waals interaction of Keesom (orientation) and Debye (induction) forces.     

RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.     

Multi-dimple phenomena in TEHL point contacts

Theoretical analysis and experimental measurement of the multiple dimples in thermal elastohydrodynamic lubrication (TEHL) point contacts have been carried out. Good agreement is found between the theoretical and experimental results. A thermal multi-spike theory is proposed to explain the multi-dimple phenomena.     

On the structure formation of hydrophobed particles in the boundary layer of water and octane phases

Two-dimensional aggregation of the surface modified glass beads was carried out in the boundary layer of water and octane phases. The effect of particles' hydrophobicity was investigated on the structure of forming aggregates and the growth process. The structure of the aggregates and their growth were characterized by a density function which demonstrates the change of mean particle density as a function of aggregate size. The growth yielded fractal or nonfractal structures in the investigated systems. The fractal structure of the aggregates was observed to be dependent on restructuring processes controlled by the surface properties of the beads.The experimental results are compared with earlier findings for aggregation of hydrophobic beads in the boundary layer of water and air phases.On leave from Loránd Eötvös University, Budapest, Hungary     

Significant change in water contact angle of electrospray‐synthesized SiO2 films depending on their surface morphology

Amorphous SiO₂ films were deposited by means of an electrospray technique. The relation between the water contact angle (WCA) of the deposited SiO₂ films and the surface morphology is investigated. The feeding rate of the electrospray process greatly affects the morphology of the synthesized SiO₂ films. There is also a significant change in the WCA on the surface of the films: the rougher the surface, the greater the WCA. A model based on the Cassie–Baxter formulation is used to explain the change observed in the WCA on the SiO₂ films. Copyright © 2012 John Wiley & Sons, Ltd.